c++ scanf讀取

Here, we have to input a valid memory address and print the value stored at memory address in C.

在這里，我們必須輸入一個有效的內存地址并在C中打印存儲在內存地址中的值。

To input and print a memory address, we use "%p" format specifier – which can be understood as "pointer format specifier".

要輸入和打印內存地址，我們使用“％p”格式說明符-可以理解為“指針格式說明符” 。

Program:

程序：

In this program - first, we are declaring a variable named num and assigning any value in it. Since we cannot predict a valid memory address. So here, we will print the memory address of num and then, we will read it from the user and print its value.

在此程序中-首先，我們聲明一個名為num的變量，并在其中分配任何值。 由于我們無法預測有效的內存地址。 因此，在這里，我們將打印num的內存地址，然后從用戶讀取并打印其值。

#include <stdio.h>int main(void) {int num = 123;int *ptr; //to store memory addressprintf("Memory address of num = %p\n", &num);printf("Now, read/input the memory address: ");scanf ("%p", &ptr);printf("Memory address is: %p and its value is: %d\n", ptr, *ptr);return 0; }

Output

輸出量

Memory address of num = 0x7ffc505d4a44 Now, read/input the memory address: 7ffc505d4a44 Memory address is: 0x7ffc505d4a44 and its value is: 123

Explanation:

說明：

In this program, we declared an unsigned int variable named num and assigned the variable with the value 123.

在此程序中，我們聲明了一個名為num的無符號int變量，并為其分配了值123 。

Then, we print the value of num by using "%p" format specifier – it will print the memory address of num – which is 0x7ffc505d4a44.

然后，我們使用“％p”格式說明符打印num的值-它會打印num的內存地址-0x7ffc505d4a44 。

Then, we prompt a message "Now, read/input the memory address: " to take input the memory address – we input the same memory address which was the memory address of num. The input value is 7ffc505d4a44. And stored the memory address to a pointer variable ptr. (you must know that only pointer variable can store the memory addresses. Read more: pointers in C language).

然后，我們提示消息“現在，讀取/輸入內存地址：”以輸入內存地址-我們輸入與num的內存地址相同的內存地址。 輸入值為7ffc505d4a44 。 并將存儲的地址存儲到指針變量ptr中 。 (您必須知道只有指針變量才能存儲內存地址。更多：C語言指針)。

Note: While input, "0x" is not required.

注意：輸入時，不需要“ 0x” 。

And finally, when we print the value using the pointer variable ptr. The value is 123.

最后，當我們使用指針變量ptr打印值時。 值是123 。

翻譯自: https://www.includehelp.com/c-programs/read-a-memory-address-using-scanf-and-print-its-value.aspx

c++ scanf讀取

總結

以上是生活随笔為你收集整理的c++ scanf读取_使用scanf（）读取内存地址并在C中打印其值的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。