前言

JavaIO一共包括兩種，一種是stream，一種是reader/writer，每種又包括in/out，所以一共是四種包。Java 流在處理上分為字符流和字節流。字符流處理的單元為 2 個字節的 Unicode 字符，分別操作字符、字符數組或字符串，而字節流處理單元為 1 個字節，操作字節和字節數組。
Java 內用 Unicode 編碼存儲字符，字符流處理類負責將外部的其他編碼的字符流和 java 內 Unicode 字符流之間的轉換。而類 InputStreamReader 和 OutputStreamWriter 處理字符流和字節流的轉換。字符流（一次可以處理一個緩沖區）一次操作比字節流（一次一個字節）效率高。

0. 目錄

Reader

BufferedReader

InputStreamReader

FileReader

總結

1. Reader

Reader是一個抽象類，其介紹如下：

Abstract class for reading character streams. The only methods that a subclass must implement are read(char[], int, int) and close(). Most subclasses, however, will override some of the methods defined here in order to provide higher efficiency, additional functionality, or both.

1.1 主要方法

abstract void close() Closes the stream and releases any system resources associated with it.void mark(int readAheadLimit) Marks the present position in the stream.boolean markSupported() Tells whether this stream supports the mark() operation.int read() Reads a single character.int read(char[] cbuf) Reads characters into an array.abstract int read(char[] cbuf, int off, int len) Reads characters into a portion of an array.int read(CharBuffer target) Attempts to read characters into the specified character buffer.boolean ready() Tells whether this stream is ready to be read.void reset() Resets the stream.long skip(long n) Skips characters.

注意，不同于stream的是reader讀的是char[]。
其常見的子類包括BufferedReader和InputStreamReader，InputStreamReader的子類FileReader也很常見，下面簡單介紹一下。

2. BufferedReader

BufferedReader繼承Reader，本身的方法非常簡單，其官方解釋如下：

Reads text from a character-input stream, buffering characters so as to provide for the efficient reading of characters, arrays, and lines.
The buffer size may be specified, or the default size may be used. The default is large enough for most purposes.

簡單翻譯一下：

從流里面讀取文本，通過緩存的方式提高效率，讀取的內容包括字符、數組和行。
緩存的大小可以指定，也可以用默認的大小。大部分情況下，默認大小就夠了。

2.1. 構造函數

BufferedReader有兩個構造函數，其聲明如下：

BufferedReader(Reader in) Creates a buffering character-input stream that uses a default-sized input buffer.BufferedReader(Reader in, int sz) Creates a buffering character-input stream that uses an input bufferof the specified size.

一個是傳一個Reader，另外一個增加了緩存的大小。

常見的初始化方法

BufferedReader br = new BufferedReader(new FileReader("d:/123.txt")); BufferedReader br = new BufferedReader(new InputStreamReader(System.in));

第一個方法是讀取一個文件；第二個方法是從標準輸入讀。

2.2. 主要方法

void close() Closes the stream and releases any system resources associated with it.void mark(int readAheadLimit) Marks the present position in the stream.boolean markSupported() Tells whether this stream supports the mark() operation, which it does.int read() Reads a single character.int read(char[] cbuf, int off, int len) Reads characters into a portion of an array.String readLine() Reads a line of text.boolean ready() Tells whether this stream is ready to be read.void reset() Resets the stream to the most recent mark.long skip(long n) Skips characters.

提供了三種讀數據的方法read、read(char[] cbuf, int off, int len)、readLine()，其中常用的是readLine。

3. InputStreamReader

InputStreamReader的介紹如下：

An InputStreamReader is a bridge from byte streams to character streams: It reads bytes and decodes them into characters using a specified charset. The charset that it uses may be specified by name or may be given explicitly, or the platform's default charset may be accepted.
Each invocation of one of an InputStreamReader's read() methods may cause one or more bytes to be read from the underlying byte-input stream. To enable the efficient conversion of bytes to characters, more bytes may be read ahead from the underlying stream than are necessary to satisfy the current read operation.
For top efficiency, consider wrapping an InputStreamReader within a BufferedReader. For example:

BufferedReader in= new BufferedReader(new InputStreamReader(System.in));

也就是說，InputStreamReader是把字節翻譯成字符的。

3.1構造函數

InputStreamReader(InputStream in) Creates an InputStreamReader that uses the default charset.InputStreamReader(InputStream in, Charset cs) Creates an InputStreamReader that uses the given charset.InputStreamReader(InputStream in, CharsetDecoder dec) Creates an InputStreamReader that uses the given charset decoder.InputStreamReader(InputStream in, String charsetName) Creates an InputStreamReader that uses the named charset.

可以看到，InputStreamReader的構造函數會傳入一個字符編碼，通常用InputStreamReader來解決亂碼問題。

3.2. 主要方法

void close() Closes the stream and releases any system resources associated with it.String getEncoding() Returns the name of the character encoding being used by this stream.int read() Reads a single character.int read(char[] cbuf, int offset, int length) Reads characters into a portion of an array.boolean ready() Tells whether this stream is ready to be read.

3.3. 示例代碼

經常用InputStreamReader解決亂碼問題，示例代碼如下：

private void test() throws Throwable {BufferedReader in = null;try {InputStreamReader isr = new InputStreamReader(new FileInputStream("d:/123.txt"), "UTF-8");in = new BufferedReader(isr);while (true) {String lineMsg = in.readLine();if (lineMsg == null || lineMsg.equals("")) {break;}}} catch (Throwable t) {throw t;} finally {try {if (in != null) {in.close();}} catch (Throwable t) {throw t;}}}

編碼集見本文末尾。

4. FileReader

其介紹如下：

Convenience class for reading character files. The constructors of this class assume that the default character encoding and the default byte-buffer size are appropriate. To specify these values yourself, construct an InputStreamReader on a FileInputStream.
FileReader is meant for reading streams of characters. For reading streams of raw bytes, consider using a FileInputStream.
FileReader是方便讀取字符文件的。

4.1. 構造函數

FileReader(File file) Creates a new FileReader, given the File to read from.FileReader(FileDescriptor fd) Creates a new FileReader, given the FileDescriptor to read from.FileReader(String fileName) Creates a new FileReader, given the name of the file to read from.

可以看到，FileReader的構造函數主要是讀取文件。

5. 總結一下：

1. BufferedReader可以更高效的讀取文件

2. InputStreamReader可以處理亂碼問題

3. FileReader可以直接讀取文件，方便

4. 常見編碼

• 7位ASCII字符，也叫作ISO646-US、Unicode字符集的基本拉丁塊
  "US-ASCII"
• ISO 拉丁字母表 No.1，也叫作 ISO-LATIN-1
  "ISO-8859-1"
• 8 位 UCS 轉換格式
  "UTF-8"
• 16 位 UCS 轉換格式，Big Endian（最低地址存放高位字節）字節順序
  "UTF-16BE"
• 16 位 UCS 轉換格式，Little-endian（最高地址存放低位字節）字節順序
  "UTF-16LE"
• 16 位 UCS 轉換格式，字節順序由可選的字節順序標記來標識
  "UTF-16"
• 中文超大字符集
  "GBK"

總結

以上是生活随笔為你收集整理的Java IO - Reader的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。