當前位置：首頁 > 编程资源 > 编程问答 >内容正文

编程问答

Sar使用

發布時間：2025/3/20 编程问答 18 豆豆

生活随笔收集整理的這篇文章主要介紹了 Sar使用小編覺得挺不錯的,現在分享給大家,幫大家做個參考.

centos 6.0默認安裝

直接使用

http://linuxdev.biz/content/10-practical-sar-usage-examples

10 Practical Sar Usage Examples

There are two ways to invoke sar.

sar followed by an option (without specifying a saXX data file). This will look for the current day’s saXX data file and report the performance data that was recorded until that point for the current day.

sar followed by an option, and additionally specifying a saXX data file using -f option. This will report the performance data for that particular day. i.e XX is the day of the month.

In all the examples below, we are going to explain how to view certain performance data for the current day. To look for a specific day, add “-f /var/log/sa/saXX” at the end of the sar command.

All the sar command will have the following as the 1st line in its output.

$ sar -u Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)

Linux 2.6.18-194.el5PAE – Linux kernel version of the system.
(dev-db) – The hostname where the sar data was collected.
03/26/2011 – The date when the sar data was collected.
_i686_ – The system architecture
(8 CPU) – Number of CPUs available on this system. On multi core systems, this indicates the total number of cores.

1. CPU Usage of ALL CPUs (sar -u)

This gives the cumulative real-time CPU usage of all CPUs. “1 3″ reports for every 1 seconds a total of 3 times. Most likely you’ll focus on the last field “%idle” to see the cpu load.

$ sar -u 1 3 Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)01:27:32 PM CPU %user %nice %system %iowait %steal %idle 01:27:33 PM all 0.00 0.00 0.00 0.00 0.00 100.00 01:27:34 PM all 0.25 0.00 0.25 0.00 0.00 99.50 01:27:35 PM all 0.75 0.00 0.25 0.00 0.00 99.00 Average: all 0.33 0.00 0.17 0.00 0.00 99.50

Following are few variations:

sar -u Displays CPU usage for the current day that was collected until that point.
sar -u 1 3 Displays real time CPU usage every 1 second for 3 times.
sar -u ALL Same as “sar -u” but displays additional fields.
sar -u ALL 1 3 Same as “sar -u 1 3″ but displays additional fields.
sar -u -f /var/log/sa/sa10 Displays CPU usage for the 10day of the month from the sa10 file.

2. CPU Usage of Individual CPU or Core (sar -P)

If you have 4 Cores on the machine and would like to see what the individual cores are doing, do the following.

“-P ALL” indicates that it should displays statistics for ALL the individual Cores.

In the following example under “CPU” column 0, 1, 2, and 3 indicates the corresponding CPU core numbers.

$ sar -P ALL 1 1 Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)01:34:12 PM CPU %user %nice %system %iowait %steal %idle 01:34:13 PM all 11.69 0.00 4.71 0.69 0.00 82.90 01:34:13 PM 0 35.00 0.00 6.00 0.00 0.00 59.00 01:34:13 PM 1 22.00 0.00 5.00 0.00 0.00 73.00 01:34:13 PM 2 3.00 0.00 1.00 0.00 0.00 96.00 01:34:13 PM 3 0.00 0.00 0.00 0.00 0.00 100.00

“-P 1″ indicates that it should displays statistics only for the 2nd Core. (Note that Core number starts from 0).

$ sar -P 1 1 1 Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)01:36:25 PM CPU %user %nice %system %iowait %steal %idle 01:36:26 PM 1 8.08 0.00 2.02 1.01 0.00 88.89

Following are few variations:

sar -P ALL Displays CPU usage broken down by all cores for the current day.
sar -P ALL 1 3 Displays real time CPU usage for ALL cores every 1 second for 3 times (broken down by all cores).
sar -P 1 Displays CPU usage for core number 1 for the current day.
sar -P 1 1 3 Displays real time CPU usage for core number 1, every 1 second for 3 times.
sar -P ALL -f /var/log/sa/sa10 Displays CPU usage broken down by all cores for the 10day day of the month from sa10 file.

3. Memory Free and Used (sar -r)

This reports the memory statistics. “1 3″ reports for every 1 seconds a total of 3 times. Most likely you’ll focus on “kbmemfree” and “kbmemused” for free and used memory.

$ sar -r 1 3 Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)07:28:06 AM kbmemfree kbmemused %memused kbbuffers kbcached kbcommit %commit kbactive kbinact 07:28:07 AM 6209248 2097432 25.25 189024 1796544 141372 0.85 1921060 88204 07:28:08 AM 6209248 2097432 25.25 189024 1796544 141372 0.85 1921060 88204 07:28:09 AM 6209248 2097432 25.25 189024 1796544 141372 0.85 1921060 88204 Average: 6209248 2097432 25.25 189024 1796544 141372 0.85 1921060 88204

Following are few variations:

sar -r
sar -r 1 3
sar -r -f /var/log/sa/sa10

4. Swap Space Used (sar -S)

This reports the swap statistics. “1 3″ reports for every 1 seconds a total of 3 times. If the “kbswpused” and “%swpused” are at 0, then your system is not swapping.

$ sar -S 1 3 Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU) ? 07:31:06 AM kbswpfree kbswpused %swpused kbswpcad %swpcad 07:31:07 AM 8385920 0 0.00 0 0.00 07:31:08 AM 8385920 0 0.00 0 0.00 07:31:09 AM 8385920 0 0.00 0 0.00 Average: 8385920 0 0.00 0 0.00

Following are few variations:

sar -S
sar -S 1 3
sar -S -f /var/log/sa/sa10

Notes:

Use “sar -R” to identify number of memory pages freed, used, and cached per second by the system.
Use “sar -H” to identify the hugepages (in KB) that are used and available.
Use “sar -B” to generate paging statistics. i.e Number of KB paged in (and out) from disk per second.
Use “sar -W” to generate page swap statistics. i.e Page swap in (and out) per second.

5. Overall I/O Activities (sar -b)

This reports I/O statistics. “1 3″ reports for every 1 seconds a total of 3 times.

Following fields are displays in the example below.

tps – Transactions per second (this includes both read and write)
rtps – Read transactions per second
wtps – Write transactions per second
bread/s – Bytes read per second
bwrtn/s – Bytes written per second

$ sar -b 1 3 Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)01:56:28 PM tps rtps wtps bread/s bwrtn/s 01:56:29 PM 346.00 264.00 82.00 2208.00 768.00 01:56:30 PM 100.00 36.00 64.00 304.00 816.00 01:56:31 PM 282.83 32.32 250.51 258.59 2537.37 Average: 242.81 111.04 131.77 925.75 1369.90

Following are few variations:

sar -b
sar -b 1 3
sar -b -f /var/log/sa/sa10

Note: Use “sar -v” to display number of inode handlers, file handlers, and pseudo-terminals used by the system.

6. Individual Block Device I/O Activities (sar -d)

To identify the activities by the individual block devices (i.e a specific mount point, or LUN, or partition), use “sar -d”

$ sar -d 1 1 Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)01:59:45 PM DEV tps rd_sec/s wr_sec/s avgrq-sz avgqu-sz await svctm %util 01:59:46 PM dev8-0 1.01 0.00 0.00 0.00 0.00 4.00 1.00 0.10 01:59:46 PM dev8-1 1.01 0.00 0.00 0.00 0.00 4.00 1.00 0.10 01:59:46 PM dev120-64 3.03 64.65 0.00 21.33 0.03 9.33 5.33 1.62 01:59:46 PM dev120-65 3.03 64.65 0.00 21.33 0.03 9.33 5.33 1.62 01:59:46 PM dev120-0 8.08 0.00 105.05 13.00 0.00 0.38 0.38 0.30 01:59:46 PM dev120-1 8.08 0.00 105.05 13.00 0.00 0.38 0.38 0.30 01:59:46 PM dev120-96 1.01 8.08 0.00 8.00 0.01 9.00 9.00 0.91 01:59:46 PM dev120-97 1.01 8.08 0.00 8.00 0.01 9.00 9.00 0.91

In the above example “DEV” indicates the specific block device.

For example: “dev53-1″ means a block device with 53 as major number, and 1 as minor number.

The device name (DEV column) can display the actual device name (for example: sda, sda1, sdb1 etc.,), if you use the -p option (pretty print) as shown below.

$ sar -p -d 1 1 Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)01:59:45 PM DEV tps rd_sec/s wr_sec/s avgrq-sz avgqu-sz await svctm %util 01:59:46 PM sda 1.01 0.00 0.00 0.00 0.00 4.00 1.00 0.10 01:59:46 PM sda1 1.01 0.00 0.00 0.00 0.00 4.00 1.00 0.10 01:59:46 PM sdb1 3.03 64.65 0.00 21.33 0.03 9.33 5.33 1.62 01:59:46 PM sdc1 3.03 64.65 0.00 21.33 0.03 9.33 5.33 1.62 01:59:46 PM sde1 8.08 0.00 105.05 13.00 0.00 0.38 0.38 0.30 01:59:46 PM sdf1 8.08 0.00 105.05 13.00 0.00 0.38 0.38 0.30 01:59:46 PM sda2 1.01 8.08 0.00 8.00 0.01 9.00 9.00 0.91 01:59:46 PM sdb2 1.01 8.08 0.00 8.00 0.01 9.00 9.00 0.91

Following are few variations:

sar -d
sar -d 1 3
sar -d -f /var/log/sa/sa10
sar -p -d

7. Display context switch per second (sar -w)

This reports the total number of processes created per second, and total number of context switches per second. “1 3″ reports for every 1 seconds a total of 3 times.

$ sar -w 1 3 Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)08:32:24 AM proc/s cswch/s 08:32:25 AM 3.00 53.00 08:32:26 AM 4.00 61.39 08:32:27 AM 2.00 57.00

Following are few variations:

sar -w
sar -w 1 3
sar -w -f /var/log/sa/sa10

8. Reports run queue and load average (sar -q)

This reports the run queue size and load average of last 1 minute, 5 minutes, and 15 minutes. “1 3″ reports for every 1 seconds a total of 3 times.

$ sar -q 1 3 Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)06:28:53 AM runq-sz plist-sz ldavg-1 ldavg-5 ldavg-15 blocked 06:28:54 AM 0 230 2.00 3.00 5.00 0 06:28:55 AM 2 210 2.01 3.15 5.15 0 06:28:56 AM 2 230 2.12 3.12 5.12 0 Average: 3 230 3.12 3.12 5.12 0

Note: The “blocked” column displays the number of tasks that are currently blocked and waiting for I/O operation to complete.

Following are few variations:

sar -q
sar -q 1 3
sar -q -f /var/log/sa/sa10

9. Report network statistics (sar -n)

This reports various network statistics. For example: number of packets received (transmitted) through the network card, statistics of packet failure etc.,. “1 3″ reports for every 1 seconds a total of 3 times.

sar -n KEYWORD

KEYWORD can be one of the following:

DEV – Displays network devices vital statistics for eth0, eth1, etc.,
EDEV – Display network device failure statistics
NFS – Displays NFS client activities
NFSD – Displays NFS server activities
SOCK – Displays sockets in use for IPv4
IP – Displays IPv4 network traffic
EIP – Displays IPv4 network errors
ICMP – Displays ICMPv4 network traffic
EICMP – Displays ICMPv4 network errors
TCP – Displays TCPv4 network traffic
ETCP – Displays TCPv4 network errors
UDP – Displays UDPv4 network traffic
SOCK6, IP6, EIP6, ICMP6, UDP6 are for IPv6
ALL – This displays all of the above information. The output will be very long.

$ sar -n DEV 1 1 Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)01:11:13 PM IFACE rxpck/s txpck/s rxbyt/s txbyt/s rxcmp/s txcmp/s rxmcst/s 01:11:14 PM lo 0.00 0.00 0.00 0.00 0.00 0.00 0.00 01:11:14 PM eth0 342.57 342.57 93923.76 141773.27 0.00 0.00 0.00 01:11:14 PM eth1 0.00 0.00 0.00 0.00 0.00 0.00 0.00

10. Report Sar Data Using Start Time (sar -s)

When you view historic sar data from the /var/log/sa/saXX file using “sar -f” option, it displays all the sar data for that specific day starting from 12:00 a.m for that day.

Using “-s hh:mi:ss” option, you can specify the start time. For example, if you specify “sar -s 10:00:00″, it will display the sar data starting from 10 a.m (instead of starting from midnight) as shown below.

You can combine -s option with other sar option.

For example, to report the load average on 26th of this month starting from 10 a.m in the morning, combine the -q and -s option as shown below.

$ sar -q -f /var/log/sa/sa23 -s 10:00:01 Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)10:00:01 AM runq-sz plist-sz ldavg-1 ldavg-5 ldavg-15 blocked 10:10:01 AM 0 127 2.00 3.00 5.00 0 10:20:01 AM 0 127 2.00 3.00 5.00 0 ... 11:20:01 AM 0 127 5.00 3.00 3.00 0 12:00:01 PM 0 127 4.00 2.00 1.00 0

There is no option to limit the end-time. You just have to get creative and use head command as shown below.

For example, starting from 10 a.m, if you want to see 7 entries, you have to pipe the above output to “head -n 10″.

$ sar -q -f /var/log/sa/sa23 -s 10:00:01 | head -n 10 Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU)10:00:01 AM runq-sz plist-sz ldavg-1 ldavg-5 ldavg-15 blocked 10:10:01 AM 0 127 2.00 3.00 5.00 0 10:20:01 AM 0 127 2.00 3.00 5.00 0 10:30:01 AM 0 127 3.00 5.00 2.00 0 10:40:01 AM 0 127 4.00 2.00 1.00 2 10:50:01 AM 0 127 3.00 5.00 5.00 0 11:00:01 AM 0 127 2.00 1.00 6.00 0 11:10:01 AM 0 127 1.00 3.00 7.00

轉載于:https://blog.51cto.com/716378/715080

總結

以上是生活随笔為你收集整理的Sar使用的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。