復制代碼 代碼如下:

[root@abc lnmp]# service php-fpm start

Starting php-fpm eAccelerator: Could not allocate 67108864 bytes, the maximum size the kernel allows is 33554432 bytes. Lower the amount of memory request or increase the limit in /proc/sys/kernel/shmmax.

[04-Dec-2013 19:06:44] NOTICE: PHP message: PHP Warning: [eAccelerator] Can not create shared memory area in Unknown on line 0

[04-Dec-2013 19:06:44] NOTICE: PHP message: PHP Fatal error: Unable to start eAccelerator module in Unknown on line 0

failed

復制代碼 代碼如下:

[root@abc lnmp]# vi /etc/sysctl.conf

# Kernel sysctl configuration file for Red Hat Linux

#

# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and

# sysctl.conf(5) for more details.

# Controls IP packet forwarding

net.ipv4.ip_forward = 0

# Controls source route verification

net.ipv4.conf.default.rp_filter = 1

# Do not accept source routing

net.ipv4.conf.default.accept_source_route = 0

# Controls the System Request debugging functionality of the kernel

kernel.sysrq = 0

# Controls whether core dumps will append the PID to the core filename.

# Useful for debugging multi-threaded applications.

kernel.core_uses_pid = 1

# Controls the use of TCP syncookies

net.ipv4.tcp_syncookies = 1

# Disable netfilter on bridges.

net.bridge.bridge-nf-call-ip6tables = 0

net.bridge.bridge-nf-call-iptables = 0

net.bridge.bridge-nf-call-arptables = 0

fs.file-max=65535

net.ipv4.tcp_max_syn_backlog = 65536

net.core.netdev_max_backlog = 32768

net.core.somaxconn = 32768

net.core.wmem_default = 8388608

net.core.rmem_default = 8388608

net.core.rmem_max = 16777216

net.core.wmem_max = 16777216

net.ipv4.tcp_timestamps = 0

net.ipv4.tcp_synack_retries = 2

net.ipv4.tcp_syn_retries = 2

net.ipv4.tcp_tw_recycle = 1

#net.ipv4.tcp_tw_len = 1

net.ipv4.tcp_tw_reuse = 1

net.ipv4.tcp_mem = 94500000 915000000 927000000

net.ipv4.tcp_max_orphans = 3276800

# TIME_OUT后等待時間

#net.ipv4.tcp_fin_timeout = 30

#net.ipv4.tcp_keepalive_time = 120

net.ipv4.ip_local_port_range = 1024 65535

kernel.shmmax = 128000000

加上最后一句話 kernel.shmmax = 128000000

然后應用sysctl -p

復制代碼 代碼如下:

[root@abc lnmp]# service php-fpm start

Starting php-fpm done

[root@abc lnmp]# /usr/bin/memcachedstart

http://www.bkjia.com/PHPjc/710586.htmlwww.bkjia.comtruehttp://www.bkjia.com/PHPjc/710586.htmlTechArticle復制代碼 代碼如下: [root@abc lnmp]# service php-fpm start Starting php-fpm eAccelerator: Could not allocate 67108864 bytes, the maximum size the kernel allows is 33554432 b...

總結

以上是生活随笔為你收集整理的php如何解决报错,php 启动报错如何解决_PHP教程的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。