Swap空间利用率不释放
某個數據庫系統，Swap空間一直利用率很高，不能釋放。
交代一下環境：
[oracle@salesdb admin]$ more /etc/redhat-release
Red Hat Enterprise Linux Server release 7.2 (Maipo)
[oracle@salesdb admin]$ sqlplus -v
SQL*Plus: Release 12.1.0.2.0 Production
[oracle@salesdb admin]$ more /etc/sysctl.conf
kernel.shmmax = 395136991232
kernel.shmall = 96468992
kernel.shmmni = 4096
kernel.sem = 5010 641280 5010 128
fs.file-max = 6815744
net.ipv4.ip_local_port_range = 9000 65500
net.ipv4.conf.all.rp_filter = 2
net.ipv4.conf.default.rp_filter = 2
net.core.rmem_default=8388608
net.core.rmem_max=16777216
net.core.wmem_default=8388608
net.core.wmem_max=16777216
fs.aio-max-nr=1048576
vm.swappiness = 0?????????????????????????? ###############這個參數###########
kernel.sysrq = 0
kernel.core_uses_pid = 1
kernel.threads-max = 65535
kernel.msgmni = 16384
kernel.msgmnb = 65535
kernel.msgmax = 65535
vm.nr_hugepages = 77572
其中設定了swappiness=0，理解的是為0就是優先使用物理內存，我們看看系統里識別到的到底是多少
調取了系統history，未找到sysctl -p或者reboot步驟，遂決定停庫讓其參數生效，還有vm.nr_hugepages參數也有oracle提供的腳本進行建議設定；
1，非7.2內核版本可參考；
#!/bin/bash
#
# hugepages_settings.sh
#
# Linux bash script to compute values for the
# recommended HugePages/HugeTLB configuration
#
# Note: This script does calculation for all shared memory
# segments available when the script is run, no matter it
# is an Oracle RDBMS shared memory segment or not.
#
# This script is provided by Doc ID 401749.1 from My Oracle Support
# http://support.oracle.com
# Welcome text
echo "
This script is provided by Doc ID 401749.1 from My Oracle Support
(http://support.oracle.com) where it is intended to compute values for
the recommended HugePages/HugeTLB configuration for the current shared
memory segments. Before proceeding with the execution please make sure
that:
* Oracle Database instance(s) are up and running
* Oracle Database 11g Automatic Memory Management (AMM) is not setup
?? (See Doc ID 749851.1)
* The shared memory segments can be listed by command:
???? # ipcs -m
Press Enter to proceed..."
read
# Check for the kernel version
KERN=`uname -r | awk -F. '{ printf("%d.%d\n",$1,$2); }'`
# Find out the HugePage size
HPG_SZ=`grep Hugepagesize /proc/meminfo | awk '{print $2}'`
# Initialize the counter
NUM_PG=0
# Cumulative number of pages required to handle the running shared memory segments
for SEG_BYTES in `ipcs -m | awk '{print $5}' | grep "[0-9][0-9]*"`
do
?? MIN_PG=`echo "$SEG_BYTES/($HPG_SZ*1024)" | bc -q`
?? if [ $MIN_PG -gt 0 ]; then
????? NUM_PG=`echo "$NUM_PG+$MIN_PG+1" | bc -q`
?? fi
done
RES_BYTES=`echo "$NUM_PG * $HPG_SZ * 1024" | bc -q`
# An SGA less than 100MB does not make sense
# Bail out if that is the case
if [ $RES_BYTES -lt 100000000 ]; then
?? echo "***********"
?? echo "** ERROR **"
?? echo "***********"
?? echo "Sorry! There are not enough total of shared memory segments allocated for
HugePages configuration. HugePages can only be used for shared memory segments
that you can list by command:
?? # ipcs -m
of a size that can match an Oracle Database SGA. Please make sure that:
* Oracle Database instance is up and running
* Oracle Database 11g Automatic Memory Management (AMM) is not configured"
?? exit 1
fi
# Finish with results
case $KERN in
?? '2.4') HUGETLB_POOL=`echo "$NUM_PG*$HPG_SZ/1024" | bc -q`;
????????? echo "Recommended setting: vm.hugetlb_pool = $HUGETLB_POOL" ;;
?? '2.6') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
??? *) echo "Unrecognized kernel version $KERN. Exiting." ;;
esac
# End
?
2，7.2內核版本可參考；
#!/bin/bash
#
# hugepages_settings.sh
#
# Linux bash script to compute values for the
# recommended HugePages/HugeTLB configuration
# on Oracle Linux
#
# Note: This script does calculation for all shared memory
# segments available when the script is run, no matter it
# is an Oracle RDBMS shared memory segment or not.
#
# This script is provided by Doc ID 401749.1 from My Oracle Support
# http://support.oracle.com
# Welcome text
echo "
This script is provided by Doc ID 401749.1 from My Oracle Support
(http://support.oracle.com) where it is intended to compute values for
the recommended HugePages/HugeTLB configuration for the current shared
memory segments on Oracle Linux. Before proceeding with the execution please note following:
* For ASM instance, it needs to configure ASMM instead of AMM.
* The 'pga_aggregate_target' is outside the SGA and
?? you should accommodate this while calculating SGA size.
* In case you changes the DB SGA size,
?? as the new SGA will not fit in the previous HugePages configuration,
?? it had better disable the whole HugePages,
?? start the DB with new SGA size and run the script again.
And make sure that:
* Oracle Database instance(s) are up and running
* Oracle Database 11g Automatic Memory Management (AMM) is not setup
?? (See Doc ID 749851.1)
* The shared memory segments can be listed by command:
???? # ipcs -m
Press Enter to proceed..."
read
# Check for the kernel version
KERN=`uname -r | awk -F. '{ printf("%d.%d\n",$1,$2); }'`
# Find out the HugePage size
HPG_SZ=`grep Hugepagesize /proc/meminfo | awk '{print $2}'`
if [ -z "$HPG_SZ" ];then
??? echo "The hugepages may not be supported in the system where the script is being executed."
??? exit 1
fi
# Initialize the counter
NUM_PG=0
# Cumulative number of pages required to handle the running shared memory segments
for SEG_BYTES in `ipcs -m | cut -c44-300 | awk '{print $1}' | grep "[0-9][0-9]*"`
do
??? MIN_PG=`echo "$SEG_BYTES/($HPG_SZ*1024)" | bc -q`
??? if [ $MIN_PG -gt 0 ]; then
??????? NUM_PG=`echo "$NUM_PG+$MIN_PG+1" | bc -q`
??? fi
done
RES_BYTES=`echo "$NUM_PG * $HPG_SZ * 1024" | bc -q`
# An SGA less than 100MB does not make sense
# Bail out if that is the case
if [ $RES_BYTES -lt 100000000 ]; then
??? echo "***********"
??? echo "** ERROR **"
??? echo "***********"
??? echo "Sorry! There are not enough total of shared memory segments allocated for
HugePages configuration. HugePages can only be used for shared memory segments
that you can list by command:
??? # ipcs -m
of a size that can match an Oracle Database SGA. Please make sure that:
* Oracle Database instance is up and running
* Oracle Database 11g Automatic Memory Management (AMM) is not configured"
??? exit 1
fi
# Finish with results
case $KERN in
??? '2.2') echo "Kernel version $KERN is not supported. Exiting." ;;
??? '2.4') HUGETLB_POOL=`echo "$NUM_PG*$HPG_SZ/1024" | bc -q`;
?????????? echo "Recommended setting: vm.hugetlb_pool = $HUGETLB_POOL" ;;
??? '2.6') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
??? '3.8') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
??? '3.10') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
??? '4.1') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
esac
# End
?
將這兩個參數修改后，sysctl -p一直卡著不動，后查看meminfo一直在緩慢增長。
# egrep 'HugePages_Total|HugePages_Free' /proc/meminfo
HugePages_Total:??? 77572???????????????????????????????????? ###########該數值一直在變，遞增#######
HugePages_Free:????? 0
考慮到停機窗口，將sysctl -p操作kill掉，reboot主機參數生效。至此swap空間也一直沒有持續增長。
[oracle@salesdb admin]$ free -m
????????????? total??????? used??????? free????? shared? buff/cache?? available
Mem:???????? 515605????? 174674??????? 1119????? 101075????? 339811????? 239079
Swap:???????? 65535?????????? 0?????? 65535
總結
以上是生活随笔為你收集整理的Swap空间利用率不释放的全部內容，希望文章能夠幫你解決所遇到的問題。
- 上一篇： Jenkins+Gradle+Git自动
- 下一篇： Django:Admin，Cookie，