文章目錄

• 3. Key Types
• • 公鑰質數E
  • 生成隨機大質數p和q
  • • 判斷素數
  • 求最小公倍數L
  • 求私鑰質數D
  • PyCryptodome generate()
• 4. Data Conversion Primitives
• 5. Cryptographic Primitives
• • 5.1. Encryption and Decryption Primitives
  • • 5.1.1 RSAEP
    • 5.1.2 RSADP
  • 5.2. Signature and Verification Primitives
  • • 5.2.1. RSASP1
    • 5.2.2. RSAVP1
• 6. Overview of Schemes
• 加解密示例
• OpenSSL接口
• • 接口
  • 命令
• 實現
• 參考資料

RSA的RFC文檔已經更新了很多次，截至本文（2023.1），最新的文檔是 RFC 8017: PKCS #1: RSA Cryptography Specifications Version 2.2。在頁面開頭搜索關鍵詞Obsolete可以鏈接到歷史文檔。應用較廣的版本是 RFC 2313: PKCS #1: RSA Encryption Version 1.5

也可以參考NIST.SP.800-56B和FIPS 186-4, Digital Signature Standard (DSS) | CSRC (nist.gov)。

PKCS， The Public-Key Cryptography Standards，涉及多個標準，其中PKCS #1為RSA的標準，可以在RFC官網搜索PKCS查閱。

簡介：

• 命名取自三位發明者的姓氏字母Ron Rivest、Adi Shamir、Leonard Adleman；
• 官網：https://rsa.com/
• 1983年申請專利，現已過期，所以可以商用；
• 公鑰密碼基于數學困難問題保證機密性，RSA的基礎是，大整數質因數分解十分困難；
• RSA的實現通常會用到Base64，主要是為了防止產生亂碼；
• RSA的密鑰長度、密文和簽名長度與模量n一致，比如2048 bits（256 bytes），參考FIPS記為nlen，RSA的安全強度與模量n的位數相關聯；
  • 2017年根據ECRYPT報告，建議長度不少于2048 bits；
  • FIPS 186-4簽名標準中為1024, 2048 和3072 bits；
• 簽名和解密（基于私鑰）比驗簽和加密（基于公鑰）慢；
• …

文章與PKCS一致。

3. Key Types

RSA Public Key：

• n, the RSA modulus(模量), a positive integer
• e, the RSA public exponent, a positive integer

RSA Private Key：

• n, the RSA modulus, a positive integer, the same as in the corresponding RSA public key.
• d, the RSA private exponent, a positive integer

其中，私鑰在RFC 8017中還有第二種表示法，參數很多，感興趣的可查看原文檔。

密鑰生成步驟參考FIPS 186-4

• B.3.1 Criteria for IFC Key Pairs
• B.3.3 Generation of Random Primes that are Probably Prime

IFC: Integer Factorization Cryptography

術語：

• LCM, Least Common Multiple, 最小公倍數。
• GCM, Greatest Common , 最大公約數。

公鑰質數E

根據FIPS 186-4 B.3.1 1(b)，E使用滿足以下條件的默認值即可：

2^16 < e < 2^256 65537 == 2^16 + 1 # default

若E采用隨機值，則性能不可控。

生成隨機大質數p和q

需要使用偽隨機數生成器生成這兩個大質數，

• (p-1)和(q-1)分別與e互素（ relatively prime to e）
• len§ = len(q) = nlen/2
• 2^(nlen-1)/2 <= p <= 2^nlen/2 - 1 == 2^len§ - 1， q一致
• p和q差值 > 2^nlen/2-100

N = p x q，生成N后丟棄p和q。

生成方法有兩種：

Provable primes (see Appendix B.3.2)

Probable primes (see Appendix B.3.3).

判斷素數

方法有很多，FIPS 186-4 C.3 PROBABILISTIC PRIMALITY TESTS提供了以下方法：

• Miller-Rabin Probabilistic Primality Test
• Enhanced Miller-Rabin Probabilistic Primality Test
• (General) Lucas Probabilistic Primality Test

其它還有費馬素性檢測（Fermat Primality Test）等。

參考代碼：\Crypto\Math\Primality.py

求最小公倍數L

L = LCM(p-1, q-1)

GCD(E, L) == 1，保證一定存在私鑰中的D；

求私鑰質數D

2^nlen/2 < D < L，若不滿足需要重新生成p和q。

E x D mod L == 1,保證可以解密還原明文。

即：D = E^-1mod L

等價于：1==(ED) mod L

Miracl庫的xgcd可以用來求模逆：

xgcd(x, p, x, x, x,); // x = 1/x mod p (p is prime)

PyCryptodome generate()

\Crypto\PublicKey\RSA.py

def generate(bits, randfunc, e=65537):# ...d = n = Integer(1)e = Integer(e)while n.size_in_bits() != bits and d < (1 << (bits // 2)):# Generate the prime factors of n: p and q.# By construciton, their product is always# 2^{bits-1} < p*q < 2^bits.size_q = bits // 2size_p = bits - size_qmin_p = min_q = (Integer(1) << (2 * size_q - 1)).sqrt()if size_q != size_p:min_p = (Integer(1) << (2 * size_p - 1)).sqrt()def filter_p(candidate):return candidate > min_p and (candidate - 1).gcd(e) == 1p = generate_probable_prime(exact_bits=size_p,randfunc=randfunc,prime_filter=filter_p)min_distance = Integer(1) << (bits // 2 - 100)def filter_q(candidate):return (candidate > min_q and(candidate - 1).gcd(e) == 1 andabs(candidate - p) > min_distance)q = generate_probable_prime(exact_bits=size_q,randfunc=randfunc,prime_filter=filter_q)n = p * qlcm = (p - 1).lcm(q - 1)d = e.inverse(lcm)

4. Data Conversion Primitives

• I2OSP - Integer-to-Octet-String == long_to_bytes
• OS2IP - Octet-String-to-Integer == bytes_to_long

5. Cryptographic Primitives

源碼參考PyCryptodome

5.1. Encryption and Decryption Primitives

公鑰加密，私鑰解密。

5.1.1 RSAEP

RSA Encryption Primitive

def RSAEP ((n, e), m):# an integer between 0 and n - 1return c = m**e % n# pycryptodome \Crypto\PublicKey\RSA.py def _encrypt(self, plaintext):if not 0 <= plaintext < self._n:raise ValueError("Plaintext too large")return int(pow(Integer(plaintext), self._e, self._n))

5.1.2 RSADP

RSA Decryption Primitive

# def RSADP (K, c):# K: one of the 2 forms of private key def RSADP((n,d), c):return m = c**d % ndef RSADP((p, q, dP, dQ, qInv, r_i, d_i, t_i), c):m_1 = c**dP % p m_2 = c**dQ % qif u > 2:m_i = c**(d_i) % r_i # i = 3, ..., uh = (m_1 - m_2) * qInv % pm = m_2 + q * hif u > 2:R = r_1for i in range(3, u+1):R = R * r_(r-1)h = (m_i - m) * t_i % r_im = m + R * h.return m# pycryptodome \Crypto\PublicKey\RSA.py def _decrypt(self, ciphertext):if not 0 <= ciphertext < self._n:raise ValueError("Ciphertext too large")if not self.has_private():raise TypeError("This is not a private key")# Blinded RSA decryption (to prevent timing attacks):# Step 1: Generate random secret blinding factor r,# such that 0 < r < n-1r = Integer.random_range(min_inclusive=1, max_exclusive=self._n)# Step 2: Compute c' = c * r**e mod ncp = Integer(ciphertext) * pow(r, self._e, self._n) % self._n# Step 3: Compute m' = c'**d mod n (normal RSA decryption)m1 = pow(cp, self._dp, self._p)m2 = pow(cp, self._dq, self._q)h = ((m2 - m1) * self._u) % self._qmp = h * self._p + m1# Step 4: Compute m = m**(r-1) mod nresult = (r.inverse(self._n) * mp) % self._n# Verify no faults occurredif ciphertext != pow(result, self._e, self._n):raise ValueError("Fault detected in RSA decryption")return result

5.2. Signature and Verification Primitives

私鑰簽名（加密），公鑰驗證（解密）。

其實和5.1加解密是一樣的。

5.2.1. RSASP1

RSA Signature Primitive, version 1

# def RSASP1 (K, m):# K one of the 2 forms of private key# m message representative, an integer between 0 and n - 1 def RSASP1((n,d), m)return s = (m**d) % ndef RSASP1((p, q, dP, dQ, qInv, r_i, d_i, t_i), m):s_1 = m**dP % ps_2 = m**dQ % qif( u > 2):s_i = m**(d_i) % r_i # i = 3, ..., uh = (s_1 - s_2) * qInv % ps = s_2 + q * hif ( u > 2 ):R = r_1for i in range(3, u+1):R = R * r_(i-1)h = (s_i - s) * t_i mod r_is = s + R * hreturn s

5.2.2. RSAVP1

RSA Verification Primitive, version 1

def RSAVP1 ((n, e), s):# an integer between 0 and n - 1return m = s**e % n

6. Overview of Schemes

這一部分僅涉及RSA對數據的處理，實際應用中還要有密鑰管理，如密鑰獲取和驗證。

Two types of scheme（方案） :

• encryption schemes
  • RSAES-OAEP (Section 7.1)
  • RSAES-PKCS1-v1_5 (Section 7.2)
• signature schemes
  • RSASSA-PSS (Section 8.1)
  • RSASSA-PKCS1-v1_5 (Section 8.2)

一對密鑰僅能用于一種應用方案。

加解密示例

# from Crypto.Util.number import inverse def inverse(u, v):"""The inverse of :data:`u` *mod* :data:`v`."""u3, v3 = u, vu1, v1 = 1, 0while v3 > 0:q = u3 // v3u1, v1 = v1, u1 - v1*qu3, v3 = v3, u3 - v3*qwhile u1<0:u1 = u1 + vreturn u1def gcd(a:int, b:int):if ( b > a):a,b = b, awhile b:a,b = b, a % breturn a;def lcm(a:int, b:int):# 最小公倍數=兩數相乘/兩數的最大公約數a1 = ab1 = bwhile b1:a1,b1 = b1, a1 % b1 #a1為最大公約數return (a * b // a1)p = 17 q = 19 n = p * q # 323 L = lcm(p-1, q-1) # 144 e = 5 # gcd(e, L) = 1 d = inverse(e,L) # 29 * 5 mod 323 == 1# RSAEP Condition: 0 < m < n m = 123 cipher = (m**e)%n # 255 decrypt = (cipher**d)%n # 123

OpenSSL接口

接口

OpenSSL 3.0以前：

https://www.openssl.org/docs/man3.0/man3/RSA_new.html https://www.openssl.org/docs/man3.0/man3/RSA_generate_key.html

OpenSSL 3.0以后：

• https://www.openssl.org/docs/man3.0/man7/EVP_PKEY-RSA.html
• https://www.openssl.org/docs/man3.0/man3/EVP_PKEY_generate.html
• https://www.openssl.org/docs/man3.0/man3/PEM_write_PrivateKey.html

Demo:

• \demos\pkey\EVP_PKEY_RSA_keygen.c

命令

openssl genrsa --help openssl rsautl -help openssl rsa -help openssl genrsa -out prikey.pem 1024openssl rsa -in prikey.pem -RSAPublicKey_out -out pubkey.pem # -----BEGIN RSA PUBLIC KEY----- openssl rsa -in prikey.pem -pubout -out pubkey.pem # -----BEGIN PUBLIC KEY----- # 用-pubout openssl rsautl -encrypt -in data.txt -inkey pubkey.pem -pubin -out data_enc.txt openssl rsautl -decrypt -in data_enc.txt -inkey prikey.pem -out data_dec.txt

實現

https://github.com/C0deStarr/CryptoImp/pubkey/rsa

參考資料

RFC 8017: PKCS #1: RSA Cryptography Specifications Version 2.2

NIST.SP.800-56Br2-Recommendation for Pair-Wise Key Establishment Using Integer Factorization Cryptography (nist.gov)

FIPS 186-4, Digital Signature Standard (DSS) | CSRC (nist.gov)

總結

以上是生活随笔為你收集整理的PKCS1_RSA的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。