一、實物連接

二、代碼實現

#include <Servo.h> const int ledPin = 8; //pin13 built-in led const int soundPin = A0; //sound sensor attach to A0 Servo myservo; void setup() {pinMode(ledPin,OUTPUT);//set ledPin as OUTPUTSerial.begin(9600); //initialize the serial communication as 9600 bpsmyservo.attach(9);//舵機引腳 }void loop() {int value = analogRead(soundPin); //read the value of sound sensor//delay(200); Serial.println(value);//print itif(value < 1000)//if the vallue of sound sensor is greater than 600{digitalWrite(ledPin,HIGH); //turn on the led//myservo.write(90);//delay(10000); //delay 200ms}else //elae {digitalWrite(ledPin,LOW); //turn off the led} }

總結

以上是生活随笔為你收集整理的arduino控制声音传感器的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。