1、實驗拓?fù)?/h4>

由于老版本IOL不支持三層EC，所有需要最新版本的IOL ，LINUX使用的是Centos 7

實驗拓?fù)?/h5>

2、交換機端配置

1、etherchannel 配置 interface Port-channel1no switchportip address 1.1.1.1 255.255.255.0 endinterface rang Ethernet0/0-1no switchportno ip addresschannel-group 1 mode on end

查看EC狀態

SW1#show etherchannel summary Flags: D - down P - bundled in port-channelI - stand-alone s - suspendedH - Hot-standby (LACP only)R - Layer3 S - Layer2U - in use N - not in use, no aggregationf - failed to allocate aggregatorM - not in use, minimum links not metm - not in use, port not aggregated due to minimum links not metu - unsuitable for bundlingw - waiting to be aggregatedd - default portA - formed by Auto LAGNumber of channel-groups in use: 1 Number of aggregators: 1Group Port-channel Protocol Ports ------+-------------+-----------+----------------------------------------------- 1 Po1(RU) - Et0/0(P) Et0/1(P) 2、lacp模式配置 interface Port-channel1no switchportip address 1.1.1.1 255.255.255.0interface rang Ethernet0/0-1no switchportno ip addresschannel-protocol lacpchannel-group 1 mode passive 因為服務器端位active這個最好配置為passive

2、linux服務器端配置

1、創建Bond綁定 (1)關閉防火墻 關閉： systemctl stop firewalld 查看狀態： systemctl status firewalld 開機禁用 ： systemctl disable firewalld (2)關閉selinux getenforce 查看selinux狀態 setenforce 0 修改文件/etc/sysconfig/selinux selinx=diabled (3)Bonding配置 修改/etc/sysconfig/network-scripts/ifcfg-bond0 DEVICE=bond0 BOOTPROTO=none BONDING_OPTS= “miimon=100 mode=0” #這里用的是模式0 IPADDR=1.1.1.2 PREFIX=24修改/etc/sysconfig/network-scripts/ifcfg-eth0 #添加eth0到bond0中 DEVICE=eth0 BOOTPROTO=none MASTER=bond0 SLAVE=yes USERCTL=no修改/etc/sysconfig/network-scripts/ifcfg-eth1 #添加eth1到bond1中 DEVICE=eth1 BOOTPROTO=none MASTER=bond0 SLAVE=yes USERCTL=no重啟網絡服務 systemctl restart network

查看bond0狀態：cat/proc/net/bonding/bond0

顯示如下表示正常

2、創建team 綁定（lacp模式） nmcli con add type team con-name team0 ifname team0 config '{"runner": {"name": "lacp"}}' ipv4.method manual ipv4.addresses 1.1.1.2/24 nmcli con add type team-slave con-name team0-slave0 ifname eth0 master team0 nmcli con add type team-slave con-name team0-slave1 ifname eth1 master team0 nmcli con up team0 啟用team0配置 nmcli con up team0-slave-eth0 啟用eth0配置 nmcli con up team0-slave-eth1 啟用eth1配置

查看team狀態

3、測試

相互可以Ping通說明實驗成功

總結

以上是生活随笔為你收集整理的EVE模拟交换机三层EC和Linux服务器端口绑定(bond team)对接的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。