arduino的esp32程序无法上传_原装正版arduino uno R3无法上传程序
RT,本人在網絡上買的原裝意大利產正版Arduino uno R3(售價159RMB,壞了很可惜,實在找不到問題所在。)無法上傳程序。
已排除問題如下:1、驅動已正確安裝
端口.PNG (2.12 KB, 下載次數: 49)
2016-5-17 21:23 上傳
(win10系統);
2、軟件使用IDE1.6.9版本,板子、端口選擇正確;
設置.png (40.46 KB, 下載次數: 49)
2016-5-17 21:29 上傳
3、沒有連接任何外接模塊(包括藍牙等),串口沒有被占用,只與電腦通過數據線有連接;
4、網上有帖子說的上傳時一直按著復位鍵或者換幾個USB口再換回來或者插拔三次以上或者先點擊上傳再插USB等方法均已嘗試,確認無效;
5、程序是很簡單的示例程序,編譯已通過沒問題;
程序.png (53.19 KB, 下載次數: 55)
2016-5-17 21:41 上傳
6、用萬用表檢查芯片引腳未發現短路的;
7、嘗試換用數據線(已檢測是沒問題的線)仍然無法上傳。
已知問題:插上線時,電源燈和L燈正常亮,但點擊上傳時L燈不閃爍,不只是什么原因。
以下是錯誤信息:
Arduino:1.6.9 (Windows 10), 開發板:"Arduino/Genuino Uno"
項目使用了 1,794 字節,占用了 (5%) 程序存儲空間。最大為 32,256 字節。
全局變量使用了210字節,(10%)的動態內存,余留1,838字節局部變量。最大為2,048字節。
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x17
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x17
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x17
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x17
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x17
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x17
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x17
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x17
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x17
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x17
上傳出錯。查看頁面 http://www.arduino.cc/en/Guide/Troubleshooting#upload 獲取建議。
在文件 -> 首選項開啟
“編譯過程中顯示詳細輸出”選項
這份報告會包含更多信息。
總結
以上是生活随笔為你收集整理的arduino的esp32程序无法上传_原装正版arduino uno R3无法上传程序的全部內容,希望文章能夠幫你解決所遇到的問題。
- 上一篇: python try catch fin
- 下一篇: livecharts中仪表盘_LiveC