利用单臂路由实验VLAN间路由
生活随笔
收集整理的這篇文章主要介紹了
利用单臂路由实验VLAN间路由
小編覺得挺不錯的,現在分享給大家,幫大家做個參考.
拓撲圖
命令
初始化： S2: sys sysname S2 vlan 10 description HR vlan 20 description Market int e0/0/1 port link-type access port default vlan 10 int e0/0/2 port link-type access port default vlan 20 int g0/0/2 port link-type trunk port trunk allow-pass vlan 10 20 qS3: sys sysname S3 vlan 30 description Manager int e0/0/1 port link-type access port default vlan 30 int g0/0/2 port link-type trunk port trunk allow-pass vlan 30 qS1: sys sysname S1 vlan batch 10 20 30 int g0/0/2 port link-type trunk port trunk allow-pass vlan 10 20 int g0/0/3 port link-type trunk port trunk allow-pass vlan 30 int g0/0/1 port link-type trunk port trunk allow-pass vlan 10 20 30 qR1: sys sysname R1 vlan batch 10 20 30 int g0/0/1.1 ip address 192.168.1.254 24 undo shut int g0/0/1.2 ip address 192.168.2.254 24 undo shut int g0/0/1.3 ip address 192.168.3.254 24 undo shut qR1上做單臂路由： R1： int g0/0/1.1 dot1q termination vid 10 arp broadcast enable int g0/0/1.2 dot1q termination vid 20 arp broadcast enable int g0/0/1.3 dot1q termination vid 30 arp broadcast enable qdisplay ip int brief //查看接口狀態 display ip routing-table總結
以上是生活随笔為你收集整理的利用单臂路由实验VLAN间路由的全部內容，希望文章能夠幫你解決所遇到的問題。
