redis配置：
1、在pom.xml中引入Java版本redis-----Jedis

<!-- https://mvnrepository.com/artifact/redis.clients/jedis --><dependency><groupId>redis.clients</groupId><artifactId>jedis</artifactId><version>2.9.0</version></dependency>

2、spring-redis.xml配置

<?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans"xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:context="http://www.springframework.org/schema/context"xsi:schemaLocation="http://www.springframework.org/schema/beanshttp://www.springframework.org/schema/beans/spring-beans.xsdhttp://www.springframework.org/schema/contexthttp://www.springframework.org/schema/context/spring-context.xsd"><!-- Redis連接池的設置 --><bean id="jedisPoolConfig" class="redis.clients.jedis.JedisPoolConfig"><!-- 控制一個pool可分配多少個jedis實例 --><property name="maxTotal" value="${redis.pool.maxActive}" /><!-- 連接池中最多可空閑maxIdle個連接 ，這里取值為20，表示即使沒有數據庫連接時依然可以保持20空閑的連接，而不被清除，隨時處于待命狀態。 --><property name="maxIdle" value="${redis.pool.maxIdle}" /><!-- 最大等待時間:當沒有可用連接時,連接池等待連接被歸還的最大時間(以毫秒計數),超過時間則拋出異常 --><property name="maxWaitMillis" value="${redis.pool.maxWait}" /><!-- 在獲取連接的時候檢查有效性 --><property name="testOnBorrow" value="${redis.pool.testOnBorrow}" /></bean><!-- 創建Redis連接池，并做相關配置 --><bean id="jedisWritePool" class="com.mlr.controller.cache.JedisPoolWriper"depends-on="jedisPoolConfig"><constructor-arg index="0" ref="jedisPoolConfig" /><constructor-arg index="1" value="${redis.hostname}" /><constructor-arg index="2" value="${redis.port}" type="int" /></bean><!-- 創建Redis工具類，封裝好Redis的連接以進行相關的操作 --><bean id="jedisUtil" class="com.mlr.controller.cache.JedisUtil" scope="singleton"><property name="jedisPool"><ref bean="jedisWritePool" /></property></bean><!-- Redis的key操作 --><bean id="jedisKeys" class="com.mlr.controller.cache.JedisUtil$Keys"scope="singleton"><constructor-arg ref="jedisUtil"></constructor-arg></bean><!-- Redis的Strings操作 --><bean id="jedisStrings" class="com.mlr.controller.cache.JedisUtil$Strings"scope="singleton"><constructor-arg ref="jedisUtil"></constructor-arg></bean><!-- Redis的Lists操作 --><bean id="jedisLists" class="com.mlr.controller.cache.JedisUtil$Lists"scope="singleton"><constructor-arg ref="jedisUtil"></constructor-arg></bean><!-- Redis的Sets操作 --><bean id="jedisSets" class="com.mlr.controller.cache.JedisUtil$Sets"scope="singleton"><constructor-arg ref="jedisUtil"></constructor-arg></bean><!-- Redis的HashMap操作 --><bean id="jedisHash" class="com.mlr.controller.cache.JedisUtil$Hash"scope="singleton"><constructor-arg ref="jedisUtil"></constructor-arg></bean> </beans>

3、redis.properties

redis.hostname=Redis所在服務器ip redis.port=6379 redis.database=0 redis.pool.maxActive=100 redis.pool.maxIdle=20 redis.pool.maxWait=3000 redis.pool.testOnBorrow=true

4、redis連接池和工具類
JedisUtil.java

package com.mlr.controller.cache;import com.mlr.controller.cache.JedisPoolWriper; import java.util.List; import java.util.Map; import java.util.Set;import redis.clients.jedis.BinaryClient.LIST_POSITION; import redis.clients.jedis.Jedis; import redis.clients.jedis.JedisPool; import redis.clients.jedis.SortingParams; import redis.clients.util.SafeEncoder;public class JedisUtil {/*** 緩存生存時間*/private final int expire = 60000;/*** 操作Key的方法*/public Keys KEYS;/*** 對存儲結構為String類型的操作*/public Strings STRINGS;/*** 對存儲結構為L(zhǎng)ist類型的操作*/public Lists LISTS;/*** 對存儲結構為Set類型的操作*/public Sets SETS;/*** 對存儲結構為HashMap類型的操作*/public Hash HASH;/*** Redis連接池對象*/private JedisPool jedisPool;/*** 獲取redis連接池*/public JedisPool getJedisPool() {return jedisPool;}/*** 設置redis連接池*/public void setJedisPool(JedisPoolWriper jedisPoolWriper) {this.jedisPool = jedisPoolWriper.getJedisPool();}/*** 從jedis連接池中獲取獲取jedis對象*/public Jedis getJedis() {return jedisPool.getResource();}/*** 設置過期時間** @author xiangze*/public void expire(String key, int seconds) {if (seconds <= 0) {return;}Jedis jedis = getJedis();jedis.expire(key, seconds);jedis.close();}/*** 設置默認過期時間** @author xiangze*/public void expire(String key) {expire(key, expire);}// *******************************************Keys*******************************************//public class Keys {public Keys(JedisUtil jedisUtil) {}/*** 清空所有key*/public String flushAll() {Jedis jedis = getJedis();String stata = jedis.flushAll();jedis.close();return stata;}/*** 更改key** @return 狀態碼*/public String rename(String oldkey, String newkey) {return rename(SafeEncoder.encode(oldkey), SafeEncoder.encode(newkey));}/*** 更改key,僅當新key不存在時才執行** @return 狀態碼*/public long renamenx(String oldkey, String newkey) {Jedis jedis = getJedis();long status = jedis.renamenx(oldkey, newkey);jedis.close();return status;}/*** 更改key** @return 狀態碼*/public String rename(byte[] oldkey, byte[] newkey) {Jedis jedis = getJedis();String status = jedis.rename(oldkey, newkey);jedis.close();return status;}/*** 設置key的過期時間，以秒為單位* **/public long expired(String key, int seconds) {Jedis jedis = getJedis();long count = jedis.expire(key, seconds);jedis.close();return count;}/*** 設置key的過期時間,它是距歷元（即格林威治標準時間 1970 年 1 月 1 日的 00:00:00，格里高利歷）的偏移量。** **/public long expireAt(String key, long timestamp) {Jedis jedis = getJedis();long count = jedis.expireAt(key, timestamp);jedis.close();return count;}/*** 查詢key的過期時間** @param key* @return 以秒為單位的時間表示*/public long ttl(String key) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();long len = sjedis.ttl(key);sjedis.close();return len;}/*** 取消對key過期時間的設置** @return 影響的記錄數*/public long persist(String key) {Jedis jedis = getJedis();long count = jedis.persist(key);jedis.close();return count;}/*** 刪除keys對應的記錄,可以是多個key** @param keys* @return 刪除的記錄數*/public long del(String... keys) {Jedis jedis = getJedis();long count = jedis.del(keys);jedis.close();return count;}/*** 刪除keys對應的記錄,可以是多個key** @param keys* @return 刪除的記錄數*/public long del(byte[]... keys) {Jedis jedis = getJedis();long count = jedis.del(keys);jedis.close();return count;}/*** 判斷key是否存在** @param key* @return boolean*/public boolean exists(String key) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();boolean exis = sjedis.exists(key);sjedis.close();return exis;}/*** 對List,Set,SortSet進行排序,如果集合數據較大應避免使用這個方法** @param key* @return List<String> 集合的全部記錄**/public List<String> sort(String key) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();List<String> list = sjedis.sort(key);sjedis.close();return list;}/*** 對List,Set,SortSet進行排序或limit** @param key* @param parame 定義排序類型或limit的起止位置.* @return List<String> 全部或部分記錄**/public List<String> sort(String key, SortingParams parame) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();List<String> list = sjedis.sort(key, parame);sjedis.close();return list;}/*** 返回指定key存儲的類型** @param key* @return String string|list|set|zset|hash**/public String type(String key) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();String type = sjedis.type(key);sjedis.close();return type;}/*** 查找所有匹配給定的模式的鍵** @param pattern key的表達式,*表示多個，？表示一個*/public Set<String> keys(String pattern) {Jedis jedis = getJedis();Set<String> set = jedis.keys(pattern);jedis.close();return set;}}// *******************************************Strings*******************************************//public class Strings {public Strings(JedisUtil jedisUtil) {}/*** 根據key獲取記錄** @param key* @return 值*/public String get(String key) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();String value = sjedis.get(key);sjedis.close();return value;}/*** 根據key獲取記錄** @param key* @return 值*/public byte[] get(byte[] key) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();byte[] value = sjedis.get(key);sjedis.close();return value;}/*** 添加記錄,如果記錄已存在將覆蓋原有的value** @param key* @param value* @return 狀態碼*/public String set(String key, String value) {return set(SafeEncoder.encode(key), SafeEncoder.encode(value));}/*** 添加記錄,如果記錄已存在將覆蓋原有的value** @param key* @param value* @return 狀態碼*/public String set(String key, byte[] value) {return set(SafeEncoder.encode(key), value);}/*** 添加記錄,如果記錄已存在將覆蓋原有的value** @param key* @param value* @return 狀態碼*/public String set(byte[] key, byte[] value) {Jedis jedis = getJedis();String status = jedis.set(key, value);jedis.close();return status;}/*** 添加有過期時間的記錄** @param key* @param seconds 過期時間，以秒為單位* @param value* @return String 操作狀態*/public String setEx(String key, int seconds, String value) {Jedis jedis = getJedis();String str = jedis.setex(key, seconds, value);jedis.close();return str;}/*** 添加有過期時間的記錄** @param key* @param seconds 過期時間，以秒為單位* @param value* @return String 操作狀態*/public String setEx(byte[] key, int seconds, byte[] value) {Jedis jedis = getJedis();String str = jedis.setex(key, seconds, value);jedis.close();return str;}/*** 添加一條記錄，僅當給定的key不存在時才插入** @param key* @param value* @return long 狀態碼，1插入成功且key不存在，0未插入，key存在*/public long setnx(String key, String value) {Jedis jedis = getJedis();long str = jedis.setnx(key, value);jedis.close();return str;}/*** 從指定位置開始插入數據，插入的數據會覆蓋指定位置以后的數據<br/>* 例:String str1="123456789";<br/>* 對str1操作后setRange(key,4,0000)，str1="123400009";** @param key* @param offset* @param value* @return long value的長度*/public long setRange(String key, long offset, String value) {Jedis jedis = getJedis();long len = jedis.setrange(key, offset, value);jedis.close();return len;}/*** 在指定的key中追加value** @param key* @param value* @return long 追加后value的長度**/public long append(String key, String value) {Jedis jedis = getJedis();long len = jedis.append(key, value);jedis.close();return len;}/*** 將key對應的value減去指定的值，只有value可以轉為數字時該方法才可用** @param key* @param number 要減去的值* @return long 減指定值后的值*/public long decrBy(String key, long number) {Jedis jedis = getJedis();long len = jedis.decrBy(key, number);jedis.close();return len;}/*** <b>可以作為獲取唯一id的方法</b><br/>* 將key對應的value加上指定的值，只有value可以轉為數字時該方法才可用** @param key* @param number 要減去的值* @return long 相加后的值*/public long incrBy(String key, long number) {Jedis jedis = getJedis();long len = jedis.incrBy(key, number);jedis.close();return len;}/*** 對指定key對應的value進行截取** @param key* @param startOffset 開始位置(包含)* @param endOffset 結束位置(包含)* @return String 截取的值*/public String getrange(String key, long startOffset, long endOffset) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();String value = sjedis.getrange(key, startOffset, endOffset);sjedis.close();return value;}/*** 獲取并設置指定key對應的value<br/>* 如果key存在返回之前的value,否則返回null** @param key* @param value* @return String 原始value或null*/public String getSet(String key, String value) {Jedis jedis = getJedis();String str = jedis.getSet(key, value);jedis.close();return str;}/*** 批量獲取記錄,如果指定的key不存在返回List的對應位置將是null** @param keys* @return List<String> 值得集合*/public List<String> mget(String... keys) {Jedis jedis = getJedis();List<String> str = jedis.mget(keys);jedis.close();return str;}/*** 批量存儲記錄** @param keysvalues 例:keysvalues="key1","value1","key2","value2";* @return String 狀態碼*/public String mset(String... keysvalues) {Jedis jedis = getJedis();String str = jedis.mset(keysvalues);jedis.close();return str;}/*** 獲取key對應的值的長度** @param key* @return value值得長度*/public long strlen(String key) {Jedis jedis = getJedis();long len = jedis.strlen(key);jedis.close();return len;}}// *******************************************Sets*******************************************//public class Sets {public Sets(JedisUtil jedisUtil) {}/*** 向Set添加一條記錄，如果member已存在返回0,否則返回1** @param key* @param member* @return 操作碼, 0或1*/public long sadd(String key, String member) {Jedis jedis = getJedis();long s = jedis.sadd(key, member);jedis.close();return s;}public long sadd(byte[] key, byte[] member) {Jedis jedis = getJedis();long s = jedis.sadd(key, member);jedis.close();return s;}/*** 獲取給定key中元素個數** @param key* @return 元素個數*/public long scard(String key) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();long len = sjedis.scard(key);sjedis.close();return len;}/*** 返回從第一組和所有的給定集合之間的差異的成員** @param keys* @return 差異的成員集合*/public Set<String> sdiff(String... keys) {Jedis jedis = getJedis();Set<String> set = jedis.sdiff(keys);jedis.close();return set;}/*** 這個命令等于sdiff,但返回的不是結果集,而是將結果集存儲在新的集合中，如果目標已存在，則覆蓋。** @param newkey 新結果集的key* @param keys 比較的集合* @return 新集合中的記錄數**/public long sdiffstore(String newkey, String... keys) {Jedis jedis = getJedis();long s = jedis.sdiffstore(newkey, keys);jedis.close();return s;}/*** 返回給定集合交集的成員,如果其中一個集合為不存在或?yàn)榭?#xff0c;則返回空Set** @param keys* @return 交集成員的集合**/public Set<String> sinter(String... keys) {Jedis jedis = getJedis();Set<String> set = jedis.sinter(keys);jedis.close();return set;}/*** 這個命令等于sinter,但返回的不是結果集,而是將結果集存儲在新的集合中，如果目標已存在，則覆蓋。** @param newkey 新結果集的key* @param keys 比較的集合* @return 新集合中的記錄數**/public long sinterstore(String newkey, String... keys) {Jedis jedis = getJedis();long s = jedis.sinterstore(newkey, keys);jedis.close();return s;}/*** 確定一個給定的值是否存在** @param key* @param member 要判斷的值* @return 存在返回1，不存在返回0**/public boolean sismember(String key, String member) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();boolean s = sjedis.sismember(key, member);sjedis.close();return s;}/*** 返回集合中的所有成員** @param key* @return 成員集合*/public Set<String> smembers(String key) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();Set<String> set = sjedis.smembers(key);sjedis.close();return set;}public Set<byte[]> smembers(byte[] key) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();Set<byte[]> set = sjedis.smembers(key);sjedis.close();return set;}/*** 將成員從源集合移出放入目標集合 <br/>* 如果源集合不存在或不包哈指定成員，不進行任何操作，返回0<br/>* 否則該成員從源集合上刪除，并添加到目標集合，如果目標集合中成員已存在，則只在源集合進行刪除** @param srckey 源集合* @param dstkey 目標集合* @param member 源集合中的成員* @return 狀態碼，1成功，0失敗*/public long smove(String srckey, String dstkey, String member) {Jedis jedis = getJedis();long s = jedis.smove(srckey, dstkey, member);jedis.close();return s;}/*** 從集合中刪除成員** @param key* @return 被刪除的成員*/public String spop(String key) {Jedis jedis = getJedis();String s = jedis.spop(key);jedis.close();return s;}/*** 從集合中刪除指定成員** @param key* @param member 要?jiǎng)h除的成員* @return 狀態碼，成功返回1，成員不存在返回0*/public long srem(String key, String member) {Jedis jedis = getJedis();long s = jedis.srem(key, member);jedis.close();return s;}/*** 合并多個集合并返回合并后的結果，合并后的結果集合并不保存<br/>** @param keys* @return 合并后的結果集合* @see*/public Set<String> sunion(String... keys) {Jedis jedis = getJedis();Set<String> set = jedis.sunion(keys);jedis.close();return set;}/*** 合并多個集合并將合并后的結果集保存在指定的新集合中，如果新集合已經存在則覆蓋** @param newkey 新集合的key* @param keys 要合并的集合**/public long sunionstore(String newkey, String... keys) {Jedis jedis = getJedis();long s = jedis.sunionstore(newkey, keys);jedis.close();return s;}}// *******************************************Hash*******************************************//public class Hash {public Hash(JedisUtil jedisUtil) {}/*** 從hash中刪除指定的存儲** @param key* @param fieid 存儲的名字* @return 狀態碼，1成功，0失敗*/public long hdel(String key, String fieid) {Jedis jedis = getJedis();long s = jedis.hdel(key, fieid);jedis.close();return s;}public long hdel(String key) {Jedis jedis = getJedis();long s = jedis.del(key);jedis.close();return s;}/*** 測試hash中指定的存儲是否存在** @param key* @param fieid 存儲的名字* @return 1存在，0不存在*/public boolean hexists(String key, String fieid) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();boolean s = sjedis.hexists(key, fieid);sjedis.close();return s;}/*** 返回hash中指定存儲位置的值** @param key* @param fieid 存儲的名字* @return 存儲對應的值*/public String hget(String key, String fieid) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();String s = sjedis.hget(key, fieid);sjedis.close();return s;}public byte[] hget(byte[] key, byte[] fieid) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();byte[] s = sjedis.hget(key, fieid);sjedis.close();return s;}/*** 以Map的形式返回hash中的存儲和值** @param key* @return Map<Strinig,String>*/public Map<String, String> hgetAll(String key) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();Map<String, String> map = sjedis.hgetAll(key);sjedis.close();return map;}/*** 添加一個對應關系** @param key* @param fieid* @param value* @return 狀態碼 1成功，0失敗，fieid已存在將更新，也返回0**/public long hset(String key, String fieid, String value) {Jedis jedis = getJedis();long s = jedis.hset(key, fieid, value);jedis.close();return s;}public long hset(String key, String fieid, byte[] value) {Jedis jedis = getJedis();long s = jedis.hset(key.getBytes(), fieid.getBytes(), value);jedis.close();return s;}/*** 添加對應關系，只有在fieid不存在時才執行** @param key* @param fieid* @param value* @return 狀態碼 1成功，0失敗fieid已存**/public long hsetnx(String key, String fieid, String value) {Jedis jedis = getJedis();long s = jedis.hsetnx(key, fieid, value);jedis.close();return s;}/*** 獲取hash中value的集合** @param key* @return List<String>*/public List<String> hvals(String key) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();List<String> list = sjedis.hvals(key);sjedis.close();return list;}/*** 在指定的存儲位置加上指定的數字，存儲位置的值必須可轉為數字類型** @param key* @param fieid 存儲位置* @param value 要增加的值,可以是負數* @return 增加指定數字后，存儲位置的值*/public long hincrby(String key, String fieid, long value) {Jedis jedis = getJedis();long s = jedis.hincrBy(key, fieid, value);jedis.close();return s;}/*** 返回指定hash中的所有存儲名字,類似Map中的keySet方法** @param key* @return Set<String> 存儲名稱的集合*/public Set<String> hkeys(String key) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();Set<String> set = sjedis.hkeys(key);sjedis.close();return set;}/*** 獲取hash中存儲的個數，類似Map中size方法** @param key* @return long 存儲的個數*/public long hlen(String key) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();long len = sjedis.hlen(key);sjedis.close();return len;}/*** 根據多個key，獲取對應的value，返回List,如果指定的key不存在,List對應位置為null** @param key* @param fieids 存儲位置* @return List<String>*/public List<String> hmget(String key, String... fieids) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();List<String> list = sjedis.hmget(key, fieids);sjedis.close();return list;}public List<byte[]> hmget(byte[] key, byte[]... fieids) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();List<byte[]> list = sjedis.hmget(key, fieids);sjedis.close();return list;}/*** 添加對應關系，如果對應關系已存在，則覆蓋** @param key* @param map 對應關系* @return 狀態，成功返回OK*/public String hmset(String key, Map<String, String> map) {Jedis jedis = getJedis();String s = jedis.hmset(key, map);jedis.close();return s;}/*** 添加對應關系，如果對應關系已存在，則覆蓋** @param key* @param map 對應關系* @return 狀態，成功返回OK*/public String hmset(byte[] key, Map<byte[], byte[]> map) {Jedis jedis = getJedis();String s = jedis.hmset(key, map);jedis.close();return s;}}// *******************************************Lists*******************************************//public class Lists {public Lists(JedisUtil jedisUtil) {}/*** List長度** @param key* @return 長度*/public long llen(String key) {return llen(SafeEncoder.encode(key));}/*** List長度** @param key* @return 長度*/public long llen(byte[] key) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();long count = sjedis.llen(key);sjedis.close();return count;}/*** 覆蓋操作,將覆蓋List中指定位置的值** @param key* @param index 位置* @param value 值* @return 狀態碼*/public String lset(byte[] key, int index, byte[] value) {Jedis jedis = getJedis();String status = jedis.lset(key, index, value);jedis.close();return status;}/*** 覆蓋操作,將覆蓋List中指定位置的值** @param index 位置* @param value 值* @return 狀態碼*/public String lset(String key, int index, String value) {return lset(SafeEncoder.encode(key), index, SafeEncoder.encode(value));}/*** 在value的相對位置插入記錄** @param where 前面插入或后面插入* @param pivot 相對位置的內容* @param value 插入的內容* @return 記錄總數*/public long linsert(String key, LIST_POSITION where, String pivot, String value) {return linsert(SafeEncoder.encode(key), where, SafeEncoder.encode(pivot),SafeEncoder.encode(value));}/*** 在指定位置插入記錄** @param key* @param where 前面插入或后面插入* @param pivot 相對位置的內容* @param value 插入的內容* @return 記錄總數*/public long linsert(byte[] key, LIST_POSITION where, byte[] pivot, byte[] value) {Jedis jedis = getJedis();long count = jedis.linsert(key, where, pivot, value);jedis.close();return count;}/*** 獲取List中指定位置的值** @param key* @param index 位置* @return 值**/public String lindex(String key, int index) {return SafeEncoder.encode(lindex(SafeEncoder.encode(key), index));}/*** 獲取List中指定位置的值** @param key* @param index 位置* @return 值**/public byte[] lindex(byte[] key, int index) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();byte[] value = sjedis.lindex(key, index);sjedis.close();return value;}/*** 將List中的第一條記錄移出List** @param key* @return 移出的記錄*/public String lpop(String key) {return SafeEncoder.encode(lpop(SafeEncoder.encode(key)));}/*** 將List中的第一條記錄移出List** @param key* @return 移出的記錄*/public byte[] lpop(byte[] key) {Jedis jedis = getJedis();byte[] value = jedis.lpop(key);jedis.close();return value;}/*** 將List中最后第一條記錄移出List** @param key* @return 移出的記錄*/public String rpop(String key) {Jedis jedis = getJedis();String value = jedis.rpop(key);jedis.close();return value;}/*** 向List尾部追加記錄** @param key* @param value* @return 記錄總數*/public long lpush(String key, String value) {return lpush(SafeEncoder.encode(key), SafeEncoder.encode(value));}/*** 向List頭部追加記錄** @param key* @param value* @return 記錄總數*/public long rpush(String key, String value) {Jedis jedis = getJedis();long count = jedis.rpush(key, value);jedis.close();return count;}/*** 向List頭部追加記錄** @param key* @param value* @return 記錄總數*/public long rpush(byte[] key, byte[] value) {Jedis jedis = getJedis();long count = jedis.rpush(key, value);jedis.close();return count;}/*** 向List中追加記錄** @param key* @param value* @return 記錄總數*/public long lpush(byte[] key, byte[] value) {Jedis jedis = getJedis();long count = jedis.lpush(key, value);jedis.close();return count;}/*** 獲取指定范圍的記錄，可以做為分頁使用** @param key* @param start* @param end* @return List*/public List<String> lrange(String key, long start, long end) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();List<String> list = sjedis.lrange(key, start, end);sjedis.close();return list;}/*** 獲取指定范圍的記錄，可以做為分頁使用** @param key* @param start* @param end 如果為負數，則尾部開始計算* @return List*/public List<byte[]> lrange(byte[] key, int start, int end) {// ShardedJedis sjedis = getShardedJedis();Jedis sjedis = getJedis();List<byte[]> list = sjedis.lrange(key, start, end);sjedis.close();return list;}/*** 刪除List中c條記錄，被刪除的記錄值為value** @param key* @param c 要?jiǎng)h除的數量，如果為負數則從List的尾部檢查并刪除符合的記錄* @param value 要匹配的值* @return 刪除后的List中的記錄數*/public long lrem(byte[] key, int c, byte[] value) {Jedis jedis = getJedis();long count = jedis.lrem(key, c, value);jedis.close();return count;}/*** 刪除List中c條記錄，被刪除的記錄值為value** @param key* @param c 要?jiǎng)h除的數量，如果為負數則從List的尾部檢查并刪除符合的記錄* @param value 要匹配的值* @return 刪除后的List中的記錄數*/public long lrem(String key, int c, String value) {return lrem(SafeEncoder.encode(key), c, SafeEncoder.encode(value));}/*** 算是刪除吧，只保留start與end之間的記錄** @param key* @param start 記錄的開始位置(0表示第一條記錄)* @param end 記錄的結束位置（如果為-1則表示最后一個，-2，-3以此類推）* @return 執行狀態碼*/public String ltrim(byte[] key, int start, int end) {Jedis jedis = getJedis();String str = jedis.ltrim(key, start, end);jedis.close();return str;}/*** 算是刪除吧，只保留start與end之間的記錄** @param key* @param start 記錄的開始位置(0表示第一條記錄)* @param end 記錄的結束位置（如果為-1則表示最后一個，-2，-3以此類推）* @return 執行狀態碼*/public String ltrim(String key, int start, int end) {return ltrim(SafeEncoder.encode(key), start, end);}}}

JedisPoolWriper.java

package com.mlr.controller.cache;import redis.clients.jedis.JedisPool; import redis.clients.jedis.JedisPoolConfig;/*** 強指定redis的JedisPool接口構造函數，這樣才能在centos成功創建jedispool* * @author xiangze**/ public class JedisPoolWriper {/** Redis連接池對象 */private JedisPool jedisPool;public JedisPoolWriper(final JedisPoolConfig poolConfig, final String host,final int port) {try {jedisPool = new JedisPool(poolConfig, host, port);} catch (Exception e) {e.printStackTrace();}}/*** 獲取Redis連接池對象* @return*/public JedisPool getJedisPool() {return jedisPool;}/*** 注入Redis連接池對象* @param jedisPool*/public void setJedisPool(JedisPool jedisPool) {this.jedisPool = jedisPool;}}

然后我們的Jedis就可以用了，把我們的業務邏輯中不需要頻繁更換的數據保存到redis中，例如，下部分代碼：

@Transactionalpublic List<Area> getAreaList(){// 定義redis的keyString key = AREALISTKEY;// 定義接收對象List<Area> areaList = null;// 定義jackson數據轉換操作類ObjectMapper mapper = new ObjectMapper();// 判斷key是否存在if (!jedisKeys.exists(key)) {// 若不存在，則從數據庫里面取出相應數據areaList = areaDao.queryArea();// 將相關的實體類集合轉換成string,存入redis里面對應的key中String jsonString;try {jsonString = mapper.writeValueAsString(areaList);} catch (JsonProcessingException e) {e.printStackTrace();logger.error(e.getMessage());throw new AreaOperationException(e.getMessage());}jedisStrings.set(key, jsonString);} else {// 若存在，則直接從redis里面取出相應數據String jsonString = jedisStrings.get(key);// 指定要將string轉換成的集合類型JavaType javaType = mapper.getTypeFactory().constructParametricType(ArrayList.class, Area.class);try {// 將相關key對應的value里的的string轉換成對象的實體類集合areaList = mapper.readValue(jsonString, javaType);} catch (JsonParseException e) {e.printStackTrace();logger.error(e.getMessage());throw new AreaOperationException(e.getMessage());} catch (JsonMappingException e) {e.printStackTrace();logger.error(e.getMessage());throw new AreaOperationException(e.getMessage());} catch (IOException e) {e.printStackTrace();logger.error(e.getMessage());throw new AreaOperationException(e.getMessage());}}return areaList; }

最近在整理一些資源工具，放在網站分享 http://tools.maqway.com
歡迎關注公眾號：麻雀唯伊 ， 不定時更新資源文章，生活優惠，或許有你想看的

總結

以上是生活随笔為你收集整理的SSM配置redis的全部?jī)?nèi)容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。