';' not allowed before ‘ELSE’ → ElSE前不允許有“;”

” clause not allowed in OLE automation section → 在OLE自動區段不允許“”子句

” is not a type identifier → 不是類型標識符

” not previously declared as a PROPERTY → 前面沒有說明PROPERTY

‘GOTO ‘ leads into or out of TRY statement GOTO → 進入或超出TRY語句的范圍

clause expected, but found → 要求子句，但出現

16-Bit fixup encountered in object file ” → 在對象文件遇到16位修復

486/487 instructions not enabled → 不能用486/487指令

Abstract methods must be virtual or dynamic→抽象方法必須為虛擬的或動態的

Array type required→需要數組類型

Assignment to FOR-Loop variable ”→給FOR循環變量賦值

Bad argument type in variable type array constructor→在變量類型數組結構中不正確的參數類型

Bad file format ”→錯誤的文件格式

Bad file format: →錯誤的文件格式

Bad global symbol definition: ” in object file ” → 對象文件”中錯誤的全局符號定義”

Bad unit format: → 錯誤的單元格式

BREAK or CONTINUE outside of loop → BREAK或CONTINUE超出循環

Cannot add or subtract relocatable symbols → 不能增加或減少可重置的符號

Cannot assign to a read-only property → 不能指定只讀屬性

Cannot BREAK, CONTINUE or EXIT out of a FINALLY clause → 超出FINALLY子句的范圍，不能使用BREAK,CONTINUE或EXIT語句

Cannot initialize local variables → 不能初始化局部變量

Cannot initialize multiple variables → 不能初始化多個變量

Cannot initialize thread local variables → 不能初始化線程局部變量

Cannot override a static method → 不能覆蓋靜態方法

Cannot read a write-only property → 不能讀取只寫屬性

Case label outside of range of case expression → CASE標號超出了CASE表達式的范圍

Circular unit reference to → 對單元循環引用

Class already has a default property → 類已具有默認的屬性

Class does not have a default property → 類沒有默認的屬性

Class or object types only allowed in type section → 在類型區段只允許有類或?qū)ο箢愋?/p>

Class type required → 需要類類型

Close error on → 文件關閉錯誤

Compile terminated by user → 用戶中止編譯

Constant expected → 要求常量

Constant expression expected → 要求常量表達式

Constant expression violates subrange bounds → 常量表達式超出子界范圍

Constant object cannot be passed as var parameter → 常量對象不能作為變量參數傳遞

Constant or type identifier expected → 要求常量或類型標識符

Constants cannot be used as open array arguments → 常量不能用作打開數組參數

Constructing instance of ” containing abstract methods → 構造的實體包含抽象的方法

Could not compile used unit ” → 不能用單元編譯

Could not create output file → 不能建立輸出文件

Could not load RLINK32.DLL → 不能加載RLINK32.DLL

Data type too large: exceeds 2 GB → 數據類型太大：超過2GB

Declaration of differs from previous declaration → 的說明與先前的說明不同

Default property must be an array property → 默認的屬性必須為數組屬性

Default values must be of ordinal, pointer or small set type → 默認的值必須為序數、指針或小集類型

Destination cannot be assigned to → 目標不能指定

Destination is inaccessible → 目標不能存取

Dispid ” already used by ” → DISPID標識號已被使用

Dispid clause only allowed in OLE automation section → DISPID子句只能在OLE自動區段中使用

Division by zero → 除數為零

Duplicate case label → CASE標號重復

Duplicate tag value → 重復的標志值

Dynamic method or message handler not allowed here → 這里不允許有動態方法或信息處理程序

Dynamic methods and message handlers not allowed in OLE automation section → 在OLE自動區段不允許有動態方法或消息處理程序

Element 0 inaccessible – use ‘Length’ or ‘SetLength’ → 元素0不能存取-使用LENGTH或SETLENGTH

Error in numeric constant → 數值常量錯誤

EXCEPT or FINALLY expected → 要求EXCEPT或FINALLY

EXPORTS allowed only at global scope EXPORTS →只允許在全局范圍使用

Expression has no value →表達式?jīng)]有值

Expression too complicated →表達式太復雜

Field definition not allowed in OLE automation section →在OLE自動區段中不允許域定義

Field definition not allowed after methods or properties →在方法或?qū)傩院蟛辉试S域定義

Field or method identifier expected →要求域或方法標識符

File not found: →文件沒有找到

File type not allowed here →這兒不允許文件類型

For loop control variable must be simple local variable → FOR循環控制變量必須為簡單局部變量

For loop control variable must have ordinal type → FOR循環控制變量必須為序數類型

FOR or WHILE loop executes zero times – deleted → FOR或WHILE循環執行零次-刪除

FOR-Loop variable ” cannot be passed as var parameter → FOR循環變量不能作為參數傳遞

FOR-Loop variable ” may be undefined after loop → 在循環后的FOR循環變量是不確定的

Function needs result type → 函數需要結果類型

Identifier redeclared: ” 標識符 → 重復說明

Illegal character in input file: ” ($) →在輸入文件中的非法字符”

Illegal message method index → 非法的消息方法指針

Illegal reference to symbol ” in object file ” →在對象文件中對符號的非法引用

Illegal type in OLE automation section: ” →在OLE自動區段中的非法類型

Illegal type in Read/Readln statement →在Read/Readln語句中的非法類型

Illegal type in Write/Writeln statement →在Write/Writeln語句中的非法類型

Inaccessible value → 不可存取的值

Incompatible types: ” and ” → 不兼容的類型和

Incompatible types: → 不兼容的類型

Inline assembler stack overflow → 內聯匯編溢出

Inline assembler syntax error → 內聯匯編語法錯誤

Instance variable ” inaccessible here → 實體變量在這里不能存取

Integer constant or variable name expected → 要求整形常量或變量名

Integer constant too large → 整型常量太大

Internal error: → 內部錯誤

Invalid combination of opcode and operands → 操作碼與操作對象的無效組合

Invalid compiler directive: ” → 無效的編譯指令

Invalid function result type → 無效的函數值類型

Invalid message parameter list →無效的消息參數列表

Invalid register combination →無效的寄存器組合

Invalid typecast → 無效的TYPECASE

Label ” is not declared in current procedure →在當前的過程中沒有說明標號

Label already defined: ” → 標號已經定義

Label declaration not allowed in interface part → 在界面部分不允許標號說明

Label declared and referenced, but not set: ” → 標號被說明及引用,但不能設置

Label expected → 要求標號

Left side cannot be assigned to → 左邊不能賦值

Line too long (more than 255 characters) → 行太長(超出255個字符)

Local class or object types not allowed → 不允許局部的類或?qū)ο箢愋?/p>

Local procedure/function ” assigned to procedure variable →局部過程/函數賦給過程變量

LOOP/JCXZ distance out of range LOOP/JCXZ → 距離超出范圍

Low bound exceeds high bound → 下界超過上界

Memory reference expected → 要求內存引用

Method ” hides virtual method of base type ” → 方法隱藏了基類型為的虛擬方法

Method ” not found in base class → 在基類中沒有找到方法

Method identifier expected → 要求方法標識符

Missing ENDIF directive → 缺少ENDIF指令

Missing operator or semicolon → 缺少操作符或分號

Missing or invalid conditional symbol in ‘$’ directive → 在$指令中缺少或無效的條件符號

Missing parameter type → 缺少參數類型

Necessary library helper function was eliminated by linker → 必要的庫幫助函數被連接程序刪除

No definition for abstract method ” allowed → 抽象方法沒有定義

Not enough actual parameters → 沒有足夠的實際參數

Number of elements differs from declaration → 元素數與說明不同

Numeric overflow → 數值溢出

Object or class type required → 需要對象或類類型

Object type required → 需要對象類型

Only register calling convention allowed in OLE automation section → 在OLE自動區段中只允許寄存器調用約定

Operand size mismatch → 運算對象大小匹配

Operator not applicable to this operand type → 運算符不使用于這一運算對象類型

order of fields in record constant differs from declaration → 在記錄常量中的域次序與說明不同

ordinal type required → 需要序數類型

Out of memory→ 內存溢出

Overflow in conversion or arithmetic operation → 轉換或算術操作溢出

Overriding automated virtual method ” cannot specify a dispid → 覆蓋的自動虛擬方法不能指定DISPID

PACKED not allowed here →這里不允許PACKED

Pointer type required → 需要指針類型

Procedure cannot have a result type → 過程不能有結果類型

Procedure DISPOSE needs destructor → 過程DISPOSE需要destructor

Procedure FAIL only allowed in constructor →過程FAIL只允許在constructor方法中

Procedure NEW needs constructor → 過程NEW需要constructor方法

PROCEDURE or FUNCTION expected → 要求PROCEDURE或FUNCTION

Procedure or function name expected → 要求過程或函數名

Program or unit ” recursively uses itself → 程序或單元遞歸

Property ” does not exist in base class → 在基類中屬性不存在

Published property ” cannot be of type → Published屬性不能具有類型

Published Real48 property ” must be Single, Double or Extended Published REAL → 屬性必須為Single, Double或Extended

Re-raising an exception only allowed in exception handler → 在意外處理中只允許重新引起意外處理

Read error on → 文件讀出錯

Record, object or class type required → 需要記錄,對象或類類型

Redeclaration of ” hides a member in the base class → 的重新說明隱藏了基類中一個元素

Redeclaration of property not allowed in OLE automation section → 在OLE自動區段中不允許屬性重復說明

Return value of function ” might be undefined → 函數的返回值可能沒有定義

Seek error on → 在中搜索錯誤

Segment/Offset pairs not supported in Borland 32-bit Pascal → 在Borland 32位的PASCAL中不支持Segment/Offset對

Sets may have at most 256 elements → 集至少有256個元素

Size of published set ” is >32 bits published → 集的大小大于32字節

Slice standard function only allowed as open array argument Slice → 標準函數只允許作為打開數組參數

Statement expected, but expression of type ” found → 要求語句,但出現類型的表達式

Statements not allowed in interface part → 在界面中不允許的語句

String constant too long → 字符串常量太長

String constant truncated to fit STRING[] → 字符串常量截取到適合STRING[]

Strings may have at most 255 elements → 字符串至少255個元素

Structure field identifier expected → 要求結構域標識符

Syntax error in real number →實數語法錯誤

System unit out of date or corrupted: missing ” → 系統單元超出日期或損壞:缺少

Text after final ‘END. → 編譯器忽略END.后的文本

This form of method call only allowed for class methods → 該方法的窗體只允許類方法

This form of method call only allowed in methods of derived types → 該方法的窗體只允許在導出類型的方法中

This type cannot be initialized →這一類型不能初始化

Thread local variables cannot be ABSOLUTE →線程局部變量不能是ABSOLUTE

Thread local variables cannot be local to a function or procedure → 線程局部變量對函數不能是局部的

Too many actual parameters → 太多的實際參數

Too many conditional symbols → 太多的條件符號

Type ” has no type info → 類型沒有類型信息

Type ” is not yet completely defined → 類型至今沒有定義

Type ” must be a class to have a PUBLISHED section → 類型必須是在PUBLISHED區段中的類

Type ” must be a class to have OLE automation → 類型必須是具有OLE自動的類

Type ” needs finalization – not allowed in file type → 類型需要初始化-不允許在文件類型中

Type ” needs finalization – not allowed in variant record → 類型需要初始化-不允許在變體記錄

Type expected → 要求TYPE

Type not allowed in OLE Automation call → 在OLE自動調用中不允許的類型

Type of expression must be BOOLEAN → 表達式的類型必須為BOOLEAN型

Type of expression must be INTEGER → 表達式的類型必須為INTEGER型

TYPEINFO standard function expects a type identifier → TYPEINFO 標準函數要求類型標識符

TYPEOF can only be applied to object types with a VMT → TYPEOF只能用于具有VMT的對象類型

Types of actual and formal var parameters must be identical →形參與實參必須一致

Undeclared identifier: ” → 未說明的標識符

Unexpected end of file in comment started on line → 以行開始的注釋中出現不應有的文件結束

Unit was compiled with a different version of → 單元與不同版本的編譯

Unit name mismatch: ” → 單元名不匹配

Unknown directive: ” → 未知的指令

Unnamed arguments must precede named arguments in OLE Automation call → 在OLE自動調用中未命名的參數必須在命名的參數前

Unsatisfied forward or external declaration: ‘ ‘ →不滿足的向前或外部說明 Unterminated string → 未結束的字符串

Value assigned to ” never used → 賦給的值從未使用過

Variable ” inaccessible here due to optimization → 由于優化,變量名在這里不能存取

Variable ” is declared but never used in ” → 變量名已說明,但不曾使用

Variable ” might not have been initialized → 變量名可能沒有初始化

Variable required → 需要變量

Virtual constructors are not allowed → 不允許虛擬的constructors方法

Write error on → 文件寫錯誤

Wrong or corrupted version of RLINK32.DLL → RLINK32.DLL版本錯誤或不能用

轉載于:https://www.cnblogs.com/cloudblogs/p/4487587.html

總結

以上是生活随笔為你收集整理的Delphi编译报错对照表的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。