Load 0000H into CX register (for borrow)

將0000H加載到CX寄存器中(借用)

Load the data into AX(accumulator) from memory 3000

從內存3000將數據加載到AX(累加器)

Load the data into BX register from memory 3002

從存儲器3002將數據加載到BX寄存器中

Subtract BX with Accumulator AX

用累加器AX減去BX

Jump if no borrow

如果沒有借錢就跳

Increment CX by 1

CX遞增1

Move data from AX(accumulator) to memory 3004

將數據從AX(累加器)移動到內存3004

Move data from CX register to memory 3006

將數據從CX寄存器移至內存3006

Stop

停止

MOV is used to load and store data.

MOV用于加載和存儲數據。

SUB is used to subtract two numbers where their one number is in accumulator or not.

SUB用于減去兩個數字，其中一個數字是否在累加器中。

JNC is a 2-bit command which is used to check whether the borrow is generated from accumulator or not.

JNC是2位命令，用于檢查借位是否從累加器生成。

INC is used to increment an register by 1.

INC用于將寄存器增加1。

HLT is used to stop the program.

HLT用于停止程序。

AX is an accumulator which is used to load and store the data.

AX是一個累加器，用于加載和存儲數據。

BX, CX is general purpose registers where BX is used for storing second number and CX is used to store borrow.

BX，CX是通用寄存器，其中BX用于存儲第二個數字，而CX用于存儲借位。